802.1X Supplicant - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

802.1x supplicant

This command sets the user name and password used for
authentication of the access point when operating as a 802.1x
supplicant and enables supplicant authentication. Use the no
form to disable the feature.
Syntax
802.1x supplicant eth_password <password>
802.1x supplicant eth_user <username>
802.1x supplicant wds_password <port> <password>
802.1x supplicant wds_user <port> <username>
802.1x supplicant <eth | wds port>
no 802.1x supplicant <eth | wds port>
• eth_password - Specifies a password for authentication
using the Ethernet port. (Range: 1-32 alphanumeric
characters)
• eth_user - Specifies a username for authentication using
the Ethernet port. (Range: 1-32 alphanumeric characters)
• wds_password - Specifies a password for authentication
using the specified WDS port. (Range: 1-32 alphanumeric
characters)
• wds_user - Specifies a username for authentication using
the specified WDS port. (Range: 1-32 alphanumeric
characters)
• eth - Enables 802.1X supplicant authentication using the
Ethernet port.
• wds - Enables 802.1X supplicant authentication using the
specified WDS port.
– port - Specifies a WDS port number. (Range: 1-16 Master;
Default
Disabled
1 Slave)
Authentication
7-55