Pppoe Service-Name; Pppoe Restart - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

pppoe service-name

This command sets the service name for the PPPoE tunnel.
Syntax
pppoe service-name <string>
string - Service name assigned by the service provider.
(Range: 1-63 alphanumeric characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
The service name is normally optional, but may be required by
some service providers.
Example
AP#(if-ethernet)#pppoe service-name classA
AP#

pppoe restart

This command restarts the PPPoE connection with updated
parameters.
Command Mode
Interface Configuration (Ethernet)
Command Usage
This command restarts PPPoE service using the most recently
configured parameters.
PPPoE Commands
7-89