Show Version; System Logging Commands - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

show version

This command displays the software version for the system.
Default Setting
None
Command Mode
Exec
Example
AP#show version
Version v1.1.2.1B05
AP#

System Logging Commands

These commands are used to configure system logging on the
wireless bridge.
Command
logging on
logging host
logging console
logging level
logging
facility-type
show logging
System Logging Commands
Function
Controls logging of error messages
Adds a syslog server host IP address
that will receive logging messages
Initiates logging of error messages to
the console
Defines the minimum severity level for
event logging
Sets the facility type for remote
logging of syslog messages
Displays the state of logging
Mode Page
GC 7-24
GC 7-24
GC 7-25
GC 7-25
GC 7-26
Exec 7-27
7-23