system name
This command specifies or modifies the system name for this
device. Use the no form to restore the default system name.
Syntax
system name name
no system name
name - The name of this host.
(Maximum length: 32 characters)
Default Setting
Outdoor Bridge
Command Mode
Global Configuration
Example
AP(config)#system name bridge-link
AP(config)#
username
This command configures the user name for management
access.
Syntax
username name
name - The name of the user.
(Length: 3-16 characters, case sensitive)
Default Setting
admin
Command Mode
Global Configuration
System Management Commands
7-19