Table of Contents
Advertisement
Hardware Installation
Mounting on Larger Diameter Poles
In addition, there is a method for attaching the pole-mounting
bracket to a pole that is 2 to 5 inches in diameter using an
adjustable steel band clamp (not included in the kit). A steel band
clamp up to 0.5 inch (1.27 cm) wide can be threaded through the
main part of the bracket to secure it to a larger diameter pole
without using the U-shaped part of the bracket. This method is
illustrated in the following figure.
Using the Wall-Mounting Bracket
Perform the following steps to mount the unit to a wall using the
wall-mounting bracket:
Note: The wall-mounting bracket does not allow the wireless bridge's
intrgrated antenna to be aligned. It is intended for use with the
unit using an external antenna.
1. Always attach the bracket to a wall with the open end of the
mounting grooves facing up (see following figure).
4-4
Steel Band Clamp
Advertisement
Table of Contents
