Command Line Interface
show system
This command displays basic system configuration settings.
Default Setting
None
Command Mode
Exec
Example
AP#show system
System Information
=========================================================
Serial Number
System Up time
seconds
System Name
System Location
System Contact
System Country Code : TW - TAIWAN
MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Native VLAN ID
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
Slot Status
Software Version
=========================================================
AP#
7-22
: 0000000000
: 0 days, 0 hours, 17 minutes, 2
: Dual Band Outdoor AP
:
: Contact
: 00-03-7F-E0-06-EA
: 192.168.2.2
: 255.255.255.0
: 0.0.0.0
: DISABLED
: 1
: ENABLED
: ENABLED
: ENABLED
: 80
: Dual band(a/g)
: v1.1.2.1B05