System Configuration
Menu
RSSI
Radio Interface A
Radio Settings
Security
Radio Interface G
Radio Settings
Security
System Identification
The system information parameters for the wireless bridge can be
left at their default settings. However, modifying these parameters
can help you to more easily distinguish different devices in your
network.
The wireless bridge allows the selection of the band to be used
for bridge links. The bridge band can support no wireless clients.
Alternatively, bridging can be disabled and both bands can
support access point functions.
6-4
Description
Controls the maximum RSSI voltage output
for specific WDS ports
Configures the IEEE 802.11a interface
Configures radio signal parameters, such as
radio channel, transmission rate, and
beacon settings
Configures data encryption using Wired
Equivalent Protection (WEP) or Wi-Fi
Protected Access (WPA)
Configures the IEEE 802.11b/g interface
Configures radio signal parameters, such as
radio channel, transmission rate, and
beacon settings
Configures data encryption using Wired
Equivalent Protection (WEP) or Wi-Fi
Protected Access (WPA)
Page
6-54
6-56
6-57
6-66
6-63
6-63
6-66