SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 146

System Configuration
command. To view the current security settings, use the show
interface wireless a command.
AP(config)#interface wireless a
Enter Wireless configuration commands, one per line.
AP(if-wireless a)#encryption wep 128
AP(if-wireless a)#key wep 1 128 ascii abcdeabcdeabc
AP(if-wireless a)#transmit-key 1
AP(if-wireless a)#exit
AP#show interface wireless a
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description
Bridge/AP
Service Type
SSID
Turbo Mode
Channel
Status
----------------802.11 Parameters--------------------------
Transmit Power
Max Station Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
----------------Security-----------------------------------
Encryption
WEP Key type
Default Transmit Key
Static Keys :
Key 1: *****
===========================================================
AP#
Note: The index and length values used in the key command must be
the same values used in the encryption and transmit-key
commands.
6-70
: Enterprise 802.11a Wireless Outdoor
: WDS Bridge
: DualBandOutdoor
: OFF
: 36
: Disable
: FULL (15 dBm)
: 54Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 2 beacons
: 64 stations
: 128-BIT WEP ENCRYPTION
: Alphanumeric
: 1
Key 2: EMPTY Key 3: EMPTY
7-110
7-112
7-113
7-120
Key 4: EMPTY
7-99