Pppoe Settings - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

to display the current settings for the primary and secondary
RADIUS servers.
AP(config)#radius-server address 192.168.1.25
AP(config)#radius-server port 181
AP(config)#radius-server key green
AP(config)#radius-server timeout 10
AP(config)#radius-server retransmit 5
AP(config)#exit
AP#show radius
Radius Server Information
========================================
IP
Port
Key
Retransmit
Timeout
========================================
Radius Secondary Server Information
========================================
IP
Port
Key
Retransmit
Timeout
========================================
AP#

PPPoE Settings

The wireless bridge uses a Point-to-Point Protocol over Ethernet
(PPPoE) connection, or tunnel, only for management traffic
between the wireless bridge and a remote PPPoE server
(typically at an ISP). Examples of management traffic that may
initiated by the wireless bridge and carried over a PPPoE tunnel
are RADIUS, Syslog, or DHCP traffic.
: 192.168.1.25
: 181
: *****
: 5
: 10
: 0.0.0.0
: 1812
: *****
: 3
: 5
Advanced Configuration
7-45
7-46
7-47
7-48
7-47
7-48
6-13