Advanced Configuration - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Advanced Configuration

The Advanced Configuration pages include the following options.
Menu
System
Identification
TCP / IP Settings Configures the IP address, subnet mask,
Radius
PPPoE Settings
Authentication
Filter Control
SNMP
Administration
System Log
WDS
Bridge
STP
Description
Configures basic administrative and client
access
Specifies the system name, location and
contact information
gateway, and domain name servers
Configures the RADIUS server for wireless
client authentication
Configures PPPoE on the Ethernet interface
for a connection to an ISP
Configures 802.1X client authentication and
MAC address authentication
Enables VLAN support and filters traffic
matching specific Ethernet protocol types
Controls access to this wireless bridge from
management stations using SNMP, as well
as the hosts that will receive trap messages
Configures user name and password for
management access; upgrades software
from local file, FTP or TFTP server; resets
configuration settings to factory defaults;
and resets the wireless bridge
Controls logging of error messages; sets the
system clock via SNTP server or manual
configuration
Sets the MAC addresses of other units in the
wireless bridge network
Sets the time for aging out entries in the
bridge MAC address table
Configures Spanning Tree Protocol
parameters
Advanced Configuration
Page
6-4
6-4
6-7
6-10
6-13
6-16
6-26
6-30
6-33
6-38
6-43
6-45
6-47
6-3