Command Line Processing - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Command Line Interface

Command Line Processing

Commands are not case sensitive. You can abbreviate
commands and parameters as long as they contain enough
letters to differentiate them from any other currently available
commands or parameters. You can use the Tab key to complete
partial commands, or enter a partial command followed by the "?"
character to display a list of possible matches. You can also use
the following editing keystrokes for command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or
backspace key
7-8
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates a task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes from cursor to the end of the command line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Shows the last command.
Repeats current command line on a new line.
Deletes the entire line.
Deletes the last word typed.
Moves the cursor backward one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.