Pppoe Local Ip; Pppoe Remote Ip - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Command Line Interface

pppoe local ip

This command sets the local IP address for the PPPoE tunnel.
Syntax
pppoe local ip <ip-address>
ip-address - IP address of the local end of the PPPoE tunnel.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
If the pppoe ip allocation mode is set to static, the local IP
address must be entered with this command, and the remote
IP address must be entered with the pppoe remote ip
command.
Example
AP#(if-ethernet)#pppoe local ip 10.7.1.200
AP#
Related Commands
pppoe ip allocation mode (page 7-82)
pppoe remote ip (page 7-86)

pppoe remote ip

This command sets the remote IP address for the PPPoE tunnel.
Syntax
pppoe remote ip <ip-address>
ip-address - IP address of the remote end of the PPPoE tunnel.
7-86