SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 154

System Configuration
show interface wireless a or show interface wireless g
command.
AP(config)#interface wireless g
Enter Wireless configuration commands, one per line.
AP(if-wireless g)#authentication shared
AP(if-wireless g)#encryption 128
AP(if-wireless g)#multicast-cipher wep
AP(if-wireless g)#key 1 128 ascii abcdeabcdeabc
AP(if-wireless g)#transmit-key 1
AP(if-wireless g)#end
AP(config)#no 802.1X
AP(config)#end
AP#show interface wireless g
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description
Bridge/AP
Service Type
SSID
Channel
Status
----------------802.11 Parameters--------------------------
Transmit Power
Max Station Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
----------------Security-----------------------------------
Closed System
Multicast cipher
Unicast cipher
WPA clients
WPA Key Mgmt Mode
WPA PSK Key Type
Encryption
Default Transmit Key
Static Keys :
Key 1: *****
Authentication Type
===========================================================
AP#
Note: The index and length values used in the key command must be
the same values used in the encryption and transmit-key
commands.
6-78
: Enterprise 802.11g WIreless Outdoor
: Access Point
: DualBandOutdoor
: 5 (AUTO)
: Disable
: FULL (20 dBm)
: 54Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 2 beacons
: 64 stations
: DISABLED
: WEP
: TKIP
: SUPPORTED
: DYNAMIC
: HEX
: 128-BIT ENCRYPTION
: 1
Key 2: EMPTY Key 3: EMPTY
: SHARED
7-109
7-110
7-114
7-112
7-113
7-51
7-120
Key 4: EMPTY
7-99