System Management Commands - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Example
The console port settings are fixed at the values shown below.
AP#show line
Console Line Information
======================================================
databits
parity
speed
stop bits
======================================================
AP#

System Management Commands

These commands are used to configure the user name,
password, browser management options, and a variety of other
system information.
Command
Country Setting
country
Device Designation
prompt
system name
snmp-server
contact
snmp-server
location
User Access
username
password
System Management Commands
: 8
: none
: 9600
: 1
Function
Sets the wireless bridge country code
for correct radio operation
Customizes the command line prompt GC
Specifies the host name for the
wireless bridge
Sets the system contact string
Sets the system location string
Configures the user name for
management access
Specifies the password for
management access
Mode Page
Exec 7-16
7-18
GC 7-19
GC 7-35
GC 7-38
GC 7-19
GC 7-20
7-15