Iapp Commands; Iapp - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Command Line Interface
Example
AP#show station
Station Table Information
===========================================================
802.11a Channel : 56
No 802.11a Channel Stations.
802.11g Channel : 11
802.11g Channel Station Table
Station Address
Authenticated Associated
TRUE
Counters:pkts
Time:Associated
===========================================================
AP#

IAPP Commands

The command described in this section enables the protocol
signaling required to ensure the successful handover of wireless
clients roaming between different 802.11f-compliant access
points. In other words, the 802.11f protocol can ensure
successful roaming between access points in a multi-vendor
environment.

iapp

This command enables the protocol signaling required to hand
over wireless clients roaming between different 802.11f-compliant
access points. Use the no form to disable 802.11f signaling.
Syntax
iapp
no iapp
7-122
: 00-04-E2-41-C2-9D VLAN ID: 0
TRUE
Tx /
4/
LastAssoc
143854
Forwarding
TRUE
Rx bytes Tx
0
LastDisAssoc LastAuth
0 0
KeyType
NONE
/ Rx
1440/ 0
0