SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 165

•
Radio Authentication Type: Shows the bridge is set as an open
system.
•
802.1X: Shows if IEEE 802.1X access control for wireless
clients is enabled.
CLI Commands for Displaying System Settings – To view the
current wireless bridge system settings, use the show system
command from the Exec mode. To view the current radio interface
settings, use the show interface wireless a command (see
page 7-120).
AP#show system
System Information
============================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code : US - UNITED STATES
MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Native VLAN ID
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
Slot Status
Software Version
============================================================
AP#
: .
: 0 days, 5 hours, 2 minutes, 4 seconds
: Dual Band Outdoor AP
:
: Contact
: 00-03-7F-BE-F8-99
: 192.168.2.2.
: 255.255.255.0
: 0.0.0.0
: DISABLED
: 1
: ENABLED
: ENABLED
: ENABLED
: 80
: Dual band(a/g)
: v1.1.0.0B07
Status Information
7-22
6-89