Command Line Interface
Filtering Commands
The commands described in this section are used to control
access to the management interface from the wireless interface
and filter traffic using specific Ethernet protocol types.
Command
filter local-bridge
filter ap-manage
filter
ethernet-type
enable
filter
ethernet-type
protocol
show filter
filter local-bridge
This command disables communication between wireless clients.
Use the no form to disable this filtering.
Syntax
filter local-bridge
no filter local-bridge
Default
Disabled
Command Mode
Global Configuration
7-76
Function
Disables communication between
wireless clients
Prevents access to the management
interface over the wireless bridge link
Checks the Ethernet type for all
incoming and outgoing Ethernet
packets against the protocol filtering
table
Sets a filter for a specific Ethernet
type
Shows the filter configuration
Mode Page
GC
7-76
GC
7-77
GC
7-78
GC
7-79
Exec
7-80