SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 104

System Configuration
Note: The specific configuration of RADIUS server software is beyond
the scope of this guide. Refer to the documentation provided with
the RADIUS server software.
When VLAN filtering is enabled, the access point must also have
802.1X authentication enabled and a RADIUS server configured.
Wireless clients must also support 802.1X client software to be
assigned to a specific VLAN.
When VLAN filtering is disabled, the access point ignores the
VLAN tags on any received frames.
Local Bridge Filter – Controls wireless-to-wireless
communications between clients through the access point.
However, it does not affect communications between wireless
clients and the wired network.
•
Disable: Allows wireless-to-wireless communications between
clients through the access point.
•
Enable: Blocks wireless-to-wireless communications between
clients through the access point.
AP Management Filter – Controls management access to the
access point from wireless clients. Management interfaces
include the web, Telnet, or SNMP.
•
Disable: Allows management access from wireless clients.
•
Enable: Blocks management access from wireless clients.
Ethernet Type Filter – Controls checks on the Ethernet type of all
incoming and outgoing Ethernet packets against the protocol
filtering table.
•
Disable: Wireless bridge does not filter Ethernet protocol
types.
6-28