Table of Contents
Advertisement
Radio Interface
Maximum Associations – (Access point mode only) Sets the
maximum number of clients that can be associated with the
access point radio at the same time.
(Range: 1-64 per radio: Default: 64)
CLI Commands for the 802.11a Wireless Interface – From the
global configuration mode, enter the interface wireless a
command to access the 802.11a radio interface. If required,
configure a name for the interface using the description
command. Use the turbo command to enable this feature before
setting the radio channel with the channel command. Set any
other parameters as required. To view the current 802.11a radio
settings, use the show interface wireless a command.
6-61
Advertisement
Table of Contents
