Wds Commands - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Example
AP#show authentication
Authentication Information
=========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 1 secs
802.1x
Broadcast Key Refresh Rate
Session Key Refresh Rate
802.1x Session Timeout Value
Address Filtering
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address
-----------------
00-70-50-cc-99-1a
00-70-50-cc-99-1b
=========================================================
AP#

WDS Commands

The commands described in this section are used to configure
the WIreless Distribution System (WDS) forwarding table.
Command
wds channel
wds mac-address
wds enable
show wds
Status
----------
DENIED
ALLOWED
Function
Selects the radio band to be used for
bridge links
Configures MAC addresses of
nodes in the wireless bridge network
Enables WDS forwarding for specific
wireless port IDs
Displays the current entries in the
WDS forwarding table
WDS Commands
: REMOTE
: SUPPORTED
: 5 min
: 5 min
: 300 secs
: DENIED
Mode Page
GC 7-62
GC 7-62
GC 7-63
Exec 7-64
7-61