Command Line Interface
Example
AP#show logging
Logging Information
============================================
Syslog State
Logging Host State
Logging Console State
Server Domain name/IP
Logging Level
Logging Facility Type
=============================================
AP#
System Clock Commands
These commands are used to configure SNTP and system clock
settings on the wireless bridge.
Command
sntp-server ip
sntp-server
enable
sntp-server
date-time
sntp-server
daylight-saving
sntp-server
timezone
show sntp
7-28
: Disabled
: Enabled
: Disabled
: none
: Error
: 16
Function
Specifies one or more time servers
Accepts time from the specified time
servers
Manually sets the system date and
time
Sets the start and end dates for
daylight savings time
Sets the time zone for the wireless
bridge's internal clock
Shows current SNTP configuration
settings
Mode Page
GC
7-29
GC
7-30
GC
7-31
GC
7-31
GC
7-32
Exec
7-33