Radius-Server Port - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

Command Line Interface
Command Mode
Global Configuration
Example
AP(config)#radius-server address 192.168.1.25
AP(config)#

radius-server port

This command sets the RADIUS server network port.
Syntax
radius-server [secondary] port <port_number>
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for
authentication messages. (Range: 1024-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
AP(config)#radius-server port 181
AP(config)#
7-46