SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 101

CLI Commands for 802.1X Authentication – Use the 802.1X
supported command from the global configuration mode to
enable 802.1X authentication. Set the session and broadcast key
refresh rate, and the re-authentication timeout. To display the
current settings, use the show authentication command from
the Exec mode.
AP(config)#802.1X supported
AP(config)#802.1X broadcast-key-refresh-rate 5
AP(config)#802.1X session-key-refresh-rate 5
AP(config)#802.1X session-timeout 300
AP(config)#exit
AP#show authentication
Authentication Information
=========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 300 secs
802.1X
Broadcast Key Refresh Rate
Session Key Refresh Rate
802.1X Session Timeout Value
Address Filtering
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address
-----------------
00-70-50-cc-99-1a
00-70-50-cc-99-1b
=========================================================
AP#
Advanced Configuration
: REMOTE
: SUPPORTED
: 5 min
: 5 min
: 300 secs
: DENIED
Status
----------
DENIED
ALLOWED
7-51
7-52
7-53
7-54
7-60
6-25