Snmp - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

System Configuration
you want to filter. To display the current settings, use the show
filters command from the Exec mode.
AP(config)#filter ap-manage
AP(config)#filter ethernet-type enable
AP(config)#filter ethernet-type protocol ARP
AP(config)#exit
AP#show filters
Protocol Filter Information
=========================================================
AP Management
Ethernet Type Filter :ENABLED
Enabled Protocol Filters
---------------------------------------------------------
Protocol: ARP
=========================================================
AP#

SNMP

You can use a network management application to manage the
wireless bridge via the Simple Network Management Protocol
(SNMP) from a management station. To implement SNMP
management, the wireless bridge must have an IP address and
subnet mask, configured either manually or dynamically. Once an
IP address has been configured, appropriate SNMP communities
and trap receivers should be configured.
Community names are used to control management access to
SNMP stations, as well as to authorize SNMP stations to receive
trap messages from the wireless bridge. To communicate with the
wireless bridge, a management station must first submit a valid
community name for authentication. You therefore need to assign
community names to specified users or user groups and set the
access level.
6-30
:ENABLED
ISO: 0x0806
7-77
7-78
7-79
7-80