degrees longitude. To display a time corresponding to your
local time, you must indicate the number of hours and minutes
your time zone is east (before) or west (after) of UTC.
Example
AP(config)#sntp-server timezone +8
AP(config)#
show sntp
This command displays the current time and configuration
settings for the SNTP client.
Command Mode
Exec
Example
AP#show sntp
SNTP Information
=========================================================
Service State
SNTP (server 1) IP
SNTP (server 2) IP
Current Time
Time Zone
Daylight Saving
=========================================================
AP#
System Clock Commands
: Enabled
: 137.92.140.80
: 192.43.244.18
: 08 : 04, Jun 20th, 2003
: +8 (TAIPEI, BEIJING)
: Enabled, from Jun, 1st to Sep, 1st
7-33