SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual page 220

Command Line Interface
Client MAC addresses can also be used for authentication on the
access point. For local MAC authentication, first define the default
filtering policy using the address filter default command. Then
enter the MAC addresses to be filtered, indicating if they are
allowed or denied. For RADIUS MAC authentication, the MAC
addresses and filtering policy must be configured on the RADIUS
server.
Command
802.1x
802.1x
broadcast-key-
refresh-rate
802.1x session-key-
refresh-rate
802.1x
session-timeout
802.1x supplicant
address filter default Sets filtering to allow or deny listed
address filter entry
address filter delete Removes a MAC address from the
mac-authentication
server
7-50
Function
Configures 802.1x as disabled,
supported, or required
Sets the interval at which the
primary broadcast keys are
refreshed for stations using 802.1x
dynamic keying
Sets the interval at which unicast
session keys are refreshed for
associated stations using dynamic
keying
Sets the timeout after which a
connected client must be
re-authenticated
Sets the supplicant user name and
password for the access point and
enables the feature
addresses
Enters a MAC address in the filter
table
filter table
Sets address filtering to be
performed with local or remote
options
Mode Page
GC 7-51
GC 7-52
GC 7-53
GC 7-54
GC 7-60
GC 7-56
GC 7-57
GC 7-58
GC 7-59