– Network or host unreachable - The gateway found no
• Press <Esc> to stop pinging.
Example
AP#ping 10.1.0.19
192.168.1.19 is alive
AP#
reset
This command restarts the system or restores the factory default
settings.
Syntax
reset <board | configuration>
• board - Reboots the system.
• configuration - Resets the configuration settings to the
factory defaults, and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On
Self-Test.
Example
This example shows how to reset the system:
AP#reset board
Reboot system now? <y/n>: y
corresponding entry in the route table.
General Commands
7-13