Table of Contents
Advertisement
Command Line Interface
Example
AP(config)#802.1x session-key-refresh-rate 5
AP(config)#
802.1x session-timeout
This command sets the time period after which a connected client
must be re-authenticated. Use the no form to disable 802.1x
re-authentication.
Syntax
802.1x session-timeout <seconds>
no 802.1x session-timeout
seconds - The number of seconds. (Range: 0-65535)
Default
0 (Disabled)
Command Mode
Global Configuration
Example
AP(config)#802.1x session-timeout 300
AP(config)#
7-54
Advertisement
Table of Contents
