Command
show interface
wireless
show station
interface wireless
This command enters wireless interface configuration mode.
Syntax
interface wireless a
• a - 802.11a radio interface.
• g - 802.11g radio interface
Default Setting
None
Command Mode
Global Configuration
Example
To specify the wireless interface, enter the following command:
AP(config)#interface wireless a
AP(if-wireless a)#
description
This command adds a description to the wireless interface. Use
the no form to remove the description.
Syntax
description <string>
no description
string - Comment or a description for this interface.
(Range: 1-80 characters)
Wireless Interface Commands
Function
Shows the status for the wireless
interface
Shows the wireless clients
associated with the access point
Mode Page
Exec
7-120
Exec
7-121
7-99