Copy - SMC Networks ElliteConnect 2.4GHz/5GHz Owner's Manual

copy

This command copies a boot file, code image, or configuration file
between the wireless bridge's flash memory and a FTP/TFTP
server. When you save the configuration settings to a file on a
FTP/TFTP server, that file can later be downloaded to the
wireless bridge to restore system operation. The success of the
file transfer depends on the accessibility of the FTP/TFTP server
and the quality of the network connection.
Syntax
copy <ftp | tftp> file
copy config <ftp | tftp>
• ftp - Keyword that allows you to copy to/from an FTP server.
• tftp - Keyword that allows you to copy to/from a TFTP
server.
• file - Keyword that allows you to copy to/from a flash
memory file.
• config - Keyword that allows you to upload the configuration
file from flash memory.
Default Setting
None
Command Mode
Exec
Command Usage
• The system prompts for data required to complete the copy
command.
• Only a configuration file can be uploaded to an FTP/TFTP
server, but every type of file can be downloaded to the
wireless bridge.
Flash/File Commands
7-41