4.4 Start-Up Flowcharts
u
Subchart A-2: Operation with Permanent Magnet Motors
Flowchart A-2 in
Figure 4.11
can be used for more energy-efficient operation in reduced or variable torque applications.
116
describes the setup procedure for running a PM motor in Open Loop Vector Control. PM motors
Input the motor data.
Run the motor without load; check the rotation direction and
operation.Verify external signal commands to the drive work as desired.
Connect the load to the motor.
Run the machine and check for desired operation.
Figure 4.11 Operation with Permanent Magnet Motors
From
Flowchart
A
(T2-01 = 0)
Return to
Flowchart
A
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual