Terminal Configuration - YASKAWA Z1000 User Manual

3.9 Control Circuit Wiring
u

Terminal Configuration

The control circuit terminals are arranged as shown in
n Wire Size and Torque Specifications
Select appropriate wire type and gauges from
ends. Refer to Table 3.8
Screw
Terminal
Size
S1-S7, SC, SN, SP
V+, A1, A2, AC
MA, MB, MC
M3
M1-M6
FM, AM, AC
R+, R-, S+, S-, IG
88
M3 M4 M6
IG R+ R- S+ S- +V AC A1 A2 FM AM AC
M1 M2 M5
FE S1 S2 S3 S4 S5 S6 S7 SN SC SP +P MA MB MC
Figure 3.21 Control Circuit Terminal Arrangement
Table
for ferrule terminal types and sizes.
Tightening
Torque
Recomm.
N•m
wire size
(lb. in)
mm
0.5 to 0.6
0.75 (18)
(4.4 to 5.3)
Figure 3.21.
IG R+ R- S+ S- +V AC A1 A2 FM AM AC
FE S1 S2 S3 S4 S5 S6 S7 SN SC SP +P
3.7. For simpler and more reliable wiring, use crimp ferrules on the wire
Table 3.7 Wire Gauges
Bare Wire Terminal
Applicable
wire size
2 2
(AWG) mm (AWG)
Stranded wire:
0.2 to 1.0
(24 to 16)
Solid wire:
0.2 to 1.5
(24 to 16)
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
M3 M4 M6
M1 M2 M5
MA MB MC
Ferrule-Type Terminal
Recomm. Applicable
wire size wire size
2 2
mm (AWG) mm (AWG)
0.25 to 0.5
0.5 (20)
(24 to 20)
Wire Type
Shielded wire,
etc.