Advanced Drive Setup Adjustments; Advanced Drive Setup Adjustments - YASKAWA Z1000 User Manual

4.13 Advanced Drive Setup Adjustments

4.13 Advanced Drive Setup Adjustments

This section explains advanced settings and parameters that may be required for drive operation.
page 269 for a complete listing of drive parameters if more information is required for parameters not listed in this section
or in 4.7 Basic Drive Setup
n A1-00: Language Selection
Selects the display language for the HOA keypad.
Note: This parameter is not reset when the drive is initialized using parameter A1-03.
No.
A1-00
Setting 0: English
Setting 1: Japanese
Setting 3: French
Setting 5: Spanish
Setting 6: Portuguese
n A1-01: Access Level Selection
Allows or restricts access to drive parameters.
No.
A1-01
Setting 0: Operation Only
A1-01, A1-04, and Drive Mode can be accessed and set. All U monitor parameters can be accessed. Parameters that are set
in A2-01 to A2-32 can be accessed in Setup Mode. Verify Mode, Setup Mode, and Auto-Tuning Mode cannot be accessed.
Setting 1: User Parameters
A1-00, A1-01, A1-04, and Drive Mode can be accessed and set. All U monitor parameters can be accessed. Parameters that
are set in A2-01 through A2-32 can be accessed in Setup Mode. Verify Mode and Auto-Tuning Mode cannot be accessed.
Setting 2: Advanced Access Level (A)
All parameters can be viewed and edited.
Notes on Parameter Access
• If the drive parameters are password protected by A1-04 and A1-05, parameters A1-01 through A1-03, A1-07, and A2-01
through A2-32 cannot be modified.
• If a digital input terminal programmed for "Program lockout" (H1-oo = 1B) is enabled, parameter values cannot be
modified, even if A1-01 is set to 1 or 2.
• If parameters are changed via serial communication, it will not be possible to edit or change parameter settings with the
HOA keypad until an Enter command is issued to the drive from the serial communication.
150
Adjustments.
Parameter Name
Language Selection
Parameter Name
Access Level Selection
Setting Range
0, 1, 3, 5, 6
Setting Range
0 to 2
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
Refer to Parameter List on
Default
0
Default
2