E5: Pm Motor Settings - YASKAWA Z1000 User Manual

No.
(Addr. Name
Hex)
E2-04
Number of Motor Poles Number of Poles
(311)
E2-05 Motor Line-to-Line
(312) Resistance
E2-10 Motor Iron Loss for
(317) Torque Compensation
E2-11
Motor Rated Power
(318)
<1> Default setting is dependent on parameter o2-04, Drive Model Selection.
<2> Display is in the following units: 5A0007 to 5A0017: 0.01 A units; 5A0022 to 5A0242: 0.1 A units.
u

E5: PM Motor Settings

No.
(Addr. Name
Hex)
E5-02
Motor Rated Power
(32A)
E5-03
Motor Rated Current
(32B)
E5-04
Number of Motor Poles PM Motor Poles
(32C)
E5-05
Motor Stator Resistance PM Mtr Arm Ohms
(32D)
E5-06 Motor d-Axis
(32E) Inductance
E5-07 Motor q-Axis
(32F) Inductance
E5-09 Motor Induction Voltage
(331) Constant 1
E5-24 Motor Induction Voltage
(353) Constant 2
<1> Default setting is dependent on parameter o2-04, Drive Model Selection.
<2> Display is in the following units: 5A0007 to 5A0017: 0.01 A units; 5A0022 to 5A0242: 0.1 A units.
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
LCD Display
Sets the number of motor poles. Automatically set during
Auto-Tuning.
Sets the phase-to-phase motor resistance. Automatically set
during Auto-Tuning.
Term Resistance
Sets the motor iron loss.
Motor Iron Loss
Sets the motor rated power in kilowatts (1 HP = 0.746 kW).
Automatically set during Auto-Tuning.
Mtr Rated Power
LCD Display
OLV/PM OLV/PM
PM Mtr Capacity
Sets the rated capacity of the motor.
OLV/PM OLV/PM
Sets the motor rated current.
PM Mtr Rated FLA
OLV/PM OLV/PM
Sets the number of motor poles.
OLV/PM OLV/PM
Set the resistance for each motor phase.
OLV/PM OLV/PM
PM Mtr d Induct
Sets the d-Axis inductance for the PM motor.
OLV/PM OLV/PM
PM Mtr q Induct
Sets the q-Axis inductance for the PM motor.
OLV/PM OLV/PM
Sets the induced peak voltage per phase in units of
0.1 mV/(rad/s) [electrical angle]. Set this parameter when using
PM Mtr Ind V 1
an IPM motor with variable torque.
Set E5-24 to 0 when setting this parameter.
OLV/PM OLV/PM
Sets the induced phase-to-phase rms voltage in units of
0.1 mV/(r/min) [mechanical angle].
PM Mtr Ind V 2
B.5 E: Motor Parameters
Description
Description
Values Page
Default: 4
Min.: 2 –
Max.: 48
<1>
Default:
–
Min.: 0.000 Ω
Max.: 65.000 Ω
<1>
Default:
–
Min.: 0 W
Max.: 65535 W
<1>
Default:
129
Min.: 0.00 kW
Max.: 650.00 kW
Values Page
<1>
Default:
129
Min.: 0.10 kW
Max.: 370.00 kW
<1>
Default:
Min: 10% of
drive rated
current 129
Max: 200% of
drive rated
<2>
current
<1>
Default:
129
Min.: 2
Max.: 48
<1>
Default:
129
Min.: 0.000 Ω
Max.: 65.000 Ω
<1>
Default:
129
Min.: 0.00 mH
Max.: 300.00 mH
<1>
Default:
130
Min.: 0.00 mH
Max.: 600.00 mH
<1>
Default:
Min.: 0.0 mV/
(rad/s)
130
Max.: 2000.0
mV/
(rad/s)
<1>
Default:
Min.: 0.0 mV/
(r/min)
130
Max.: 6500.0
mV/
(r/min)
B
285