YASKAWA Z1000 User Manual page 108

4.3 The Drive, Programming, and Clock Adjustment Modes
3 Press the ENTER key to enter select the parameter setting mode.
4 Use the up and down arrow keys to scroll through display menu until parameter o4-17 appears.
5 Press the ENTER key until "0" flashes.
6 Press the up arrow key so that the display changes to "1".
Press the ENTER key and the time setting screen will appear. Use the right arrow key to select
7
the desired digit, then set the correct date and time using the up and down arrow keys.
After entering the correct time, press the ENTER key to save the changes.
8
The display will return to the display shown in step 5 and the alarm LED will be OFF.
n o4-17: Set/Reset Real Time Clock
The time setting screen will appear.
No.
(Addr. LCD Display
Hex)
Set Time
o4-17 0: — —
(3100) 1: Set
2: Reset
Setting 0: — —
No Setting
Setting 1: Set
The HOA keypad shows the Clock Adjustment display. In Clock Adjustment Mode the user can adjust the Real Time Clock.
Setting 2: Reset
The Real-Time Clock data is cleared. A TIM fault will occur until o4-17 is set to 1 to set the Real Time Clock.
108
Procedure
Name
Sets the current date and time for the Real Time Clock.
Set/Reset Real Time 0: — — No Setting
Clock 1: Real Time Clock Set
2: Real Time Clock Reset
Description
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
Display
ALM ALM
- PRMSET - PRG
Initialization
A1-00 = 0
Select Language
FWD
HOME DATA
ALM ALM
- PRMSET - PRG
Maintenance
o4-17 = 0
Set time
FWD
HOME DATA
ALM ALM
- PRMSET - PRG
Set time
o4-17= 0 *0*
- -
"0"
FWD
HOME DATA
ALM ALM
- PRMSET - PRG
Set time
o4-17= 1 *0*
Set
"0"
HOME FWD
DATA
ALM ALM
YYYY/MM/DD HH:MM
20 1 0/01/01 00:00
Second per month
+ 0 sec
ALM
Entry accepted
Values
Default: 0
Range: 0 to 2