u Subchart A-1: Parallel Operation of Multiple Motors by V/f Control
Subchart A-1 describes simple motor setup for V/f Control without PG feedback.
Figure 4.9
YASKAWA ELECTRIC TOEP C710687 02B FSDrive-MV1000 Instructions
Set E1-
Turn on the main circuit power.
Run the motor without load; check the rotation direction and operation.
Verify external signal commands to the drive work as desired.
Couple the load or machine to the motor.
Run the machine and check for desired operation.
Figure 4.9 Parallel Operation of Multiple Motors by V/f Control
From
Flowchart
A
(V/f pattern).
Return to
Flowchart
A
4.4 Start-Up Flowcharts
4
121