Preface; Applicable Documentation; Symbols; Terms And Abbreviations - YASKAWA Z1000 User Manual

i.1 Preface

i.1

Preface

Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection and
application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa accepts no
responsibility for the way its products are incorporated into the final system design. Without exception, all controls should be
designed to detect faults dynamically and fail safely under all circumstances. All systems or equipment designed to incorporate
a product manufactured by Yaskawa must be supplied to the end user with appropriate warnings and instructions as to the safe
use and operation of that part. Any warnings provided by Yaskawa must be promptly provided to the end user. Yaskawa offers
an express warranty only as to the quality of its products in conforming to standards and specifications published in the Yaskawa
manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal
injury, property damage, losses, or claims arising from misapplication of its products.
This manual is designed to ensure correct and suitable application of Z1000-series drives. Read this manual before attempting
to install, operate, maintain, or inspect a drive and keep it in a safe, convenient location for future reference. Be sure you
understand all precautions and safety information before attempting application.
u

Applicable Documentation

The following manuals are available for Z1000-series drives (600 V models):
Z1000-Series AC Drive Quick Start Guide (600 V Models): TOEPYAIZ1U02
This manual is packaged together with the product and contains essential safety information and simplified information for
the Z1000-series 600 V class AC drive. This document also provides basic instructions on mechanical installation, a
DIGITAL OPERATOR JVOP-183 ALM
connection diagram, main circuit and control circuit connections, switch and jumper configuration, basic troubleshooting,
standards compliance and fusing, drive specifications and an abbreviated parameter list.
F1 F2
M M
ESC
HAND
RESET ENTER
Z1000-Series AC Drive User Manual (600 V Models): TOEPYAIZ1U03
AUTO OFF
Read this manual first. This manual contains basic information required to install and wire the drive. It also gives detailed
information on fault diagnostics, parameter settings, and BACnet specifications. The purpose of this manual is to prepare
the drive for a trial run with an application and for basic operation. This manual is available for download on our
documentation website, www.yaskawa.com.
Z1000-Series AC Drive Programming Manual (600 V Models): SIEPYAIZ1U03
This manual provides detailed information on parameter settings, drive functions, maintenance, and MEMOBUS/Modbus
specifications. Use this manual to expand drive functionality. This manual is available for download on our documentation
website, www.yaskawa.com.
u

Symbols

Note: Indicates a supplement or precaution that does not cause drive damage.
Indicates a term or definition used in this manual.
TERMS TERMS
u

Terms and Abbreviations

• Drive: Yaskawa Z1000-Series Drive
TERMS TERMS
• Digital Operator: Hand Off Auto (HOA) Keypad JVOP-183
• H: Hexadecimal Number Format
• IGBT: Insulated Gate Bipolar Transistor
• kbps: Kilobits per Second
• MAC: Media Access Control
• r/min: Revolutions per Minute
• V/f: V/f Control
• OLV/PM: Open Loop Vector Control for PM
• PM motor: Permanent Magnet Synchronous motor (an abbreviation for IPM motor or SPM motor)
• IPM motor: Interior Permanent Magnet Motor (e.g., Yaskawa SSR1 Series and SST4 Series motors)
• SPM motor: Surface mounted Permanent Magnet Motor (e.g., Yaskawa SMRA Series motors)
12 YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual