Using The Hoa Keypad; Using The Hoa Keypad; Keys And Displays - YASKAWA Z1000 User Manual

Ac drive for hvac fan and pump
Hide thumbs Also See for Z1000:
Table of Contents

Advertisement

4.2

Using the HOA Keypad

Use the HOA keypad to enter OFF commands, switch AUTO or HAND Mode, change parameters, and display data including
fault and alarm information.
u

Keys and Displays

No.
Display
F1
Function Key
1
(F1, F2)
F2
2
ESC Key
ESC
3
RESET Key
4
AUTO Key
AUTO
5
Up Arrow Key
6
Down Arrow Key
7
OFF Key
OFF
8
ENTER Key
9
HAND Key
HAND
10
AUTO Light
AUTO
11
HAND Light
HAND
12
ALM LED Light
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
1
2
3
10
Figure 4.1 Keys and Displays on the HOA Keypad
Name
The functions assigned to F1 and F2 vary depending on the currently displayed menu. The name of
each function appears in the lower half of the display window.
• Returns to the previous display.
• Moves the cursor one space to the left.
• Pressing and holding this button will return to the Frequency Reference display.
• Moves the cursor to the right.
• Resets the drive to clear a fault situation.
Selects the source of Run command and frequency reference.
• Set the drive to AUTO mode.
• Run command input source depends on b1-02.
• Frequency reference input source depends on b1-01.
Scrolls up to display the next item, selects parameter numbers, and increments setting values.
Scrolls down to display the previous item, selects parameter numbers, and decrements setting values.
Follows the stopping method set in b1-03 to stop drive operation.
Note:
The keypad OFF key is not functional when the drive is in Emergency Override.
• Enters parameter values and settings.
• Selects a menu item to move between displays.
The drive runs at a selectable frequency reference source by b1-12.
• Set the drive to HAND mode.
• When b1-13 is set to 1, HAND and AUTO mode can be switched while the drive is running.
Lit while the drive is in AUTO mode. Refer to page
Lit while the drive is in HAND mode. Refer to page
Refer to ALARM (ALM) LED Displays on page
12
ALM
DIGITAL OPERATOR JVOP-183
11
F1
F2
9
M
M
ESC
HAND
8
RESET
ENTER
AUTO
OFF
4
5 6
7
Function

4.2 Using the HOA Keypad

103
for details.
103
for details.
103.
4
101

Advertisement

Table of Contents
loading

Table of Contents