O3: Copy Function; O4: Maintenance Monitor Settings - YASKAWA Z1000 User Manual

B.10 o: Operator-Related Settings
u

o3: Copy Function

No.
(Addr. Name
Hex)
o3-01
Copy Function Selection
(515)
o3-02
Copy Allowed Selection
(516)
u

o4: Maintenance Monitor Settings

No.
(Addr. Name
Hex)
o4-01 Cumulative Operation
(50B) Time Setting
o4-02 Cumulative Operation
(50C) Time Selection
o4-03 Cooling Fan Operation
(50E) Time Setting
o4-05 Capacitor Maintenance
(51D) Setting
DC Bus Pre-Charge
o4-07
Relay Maintenance
(523)
Setting
o4-11
U2, U3 Initialization
(510)
o4-12 kWh Monitor
(512) Initialization
Number of Run
o4-13
Commands Counter
(528)
Initialization
o4-17 Set/Reset Real Time
(3100) Clock
308
LCD Display
0: No action
COPY SELECT
1: Read parameters from the drive, saving them onto the HOA
0: COPY SELECT
keypad.
1: INV→OP READ
2: Copy parameters from the HOA keypad, writing them to the
2: OP→INV WRITE
drive.
3: OP←→INV
3: Verify parameter settings on the drive to check if they match
VERIFY
the data saved on the HOA keypad.
Read Allowable 0: Read operation prohibited
0: Disabled 1: Read operation allowed
1: Enabled
LCD Display
Sets the value for the cumulative operation time of the drive in
DrvElapsTimeCnt units of 10 h.
ElapsTimeCntSet 0: Logs power-on time
0: Power-On Time 1: Logs operation time when the drive output is active (output
1: Running Time operation time).
Sets the value of the fan operation time monitor U4-03 in units
FanElapsTimeCn of 10 h.
Sets the value of the Maintenance Monitor for the capacitors. See
BusCap Maint Set U4-05 to check when the capacitors may need to be replaced.
Sets the value of the Maintenance Monitor for the soft charge
ChrgCircMaintSet bypass relay. See U4-06 to check when the bypass relay may need
to be replaced.
0: U2-oo and U3-oo monitor data is not reset when the drive
Fault Data Init
is initialized (A1-03).
0: No Reset
1: U2-oo and U3-oo monitor data is reset when the drive is
1: Reset
initialized (A1-03).
0: U4-10 and U4-11 monitor data is not reset when the drive is
kWh Monitor Init
initialized (A1-03).
0: No Reset
1: U4-10 and U4-11 monitor data is reset when the drive is
1: Reset
initialized (A1-03).
0: Number of Run commands counter is not reset when the drive
Run Counter Init
is initialized (A1-03).
0: No Reset
1: Number of Run commands counter is reset when the drive is
1: Reset
initialized (A1-03).
Set Time Sets the current date and time for the Real Time Clock.
0: — — 0: — — No Setting
1: Set 1: Real Time Clock Set
2: Reset 2: Real Time Clock Reset
Description
Description
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
Values Page
Default: 0
185
Range: 0 to 3
Default: 0
185
Range: 0, 1
Values Page
Default: 0 h
Min.: 0 185
Max.: 9999
Default: 1
185
Range: 0, 1
Default: 0 h
Min.: 0 186
Max.: 9999
Default: 0%
Min.: 0 186
Max.: 150
Default: 0%
Min.: 0 186
Max.: 150
Default: 0
186
Range: 0, 1
Default: 0
186
Range: 0, 1
Default: 0
186
Range: 0, 1
Default: 0
186
Range: 0 to 2