YASKAWA Z1000 User Manual page 43

Internal/Flush-Mount
An internal/flush-mount requires an installation support set that must be purchased separately. Contact Yaskawa to order an
installation support set and mounting hardware.
1.
Cut an opening in the enclosure panel for the HOA keypad as shown in
2.
Mount the HOA keypad to the installation support.
3.
Mount the installation support set and HOA keypad to the enclosure panel.
M4 × 10
Phillips truss head screw × 4
(for panel widths between 1 (0.04) and 1.6 (0.06))
Note: Use a gasket between the enclosure panel and the HOA keypad in environments with a significant amount of dust or other airborne debris.
YASKAWA TOEP YAIZ1U 03B YASKAWA AC Drive – Z1000 User Manual
Figure 2.9
Figure 2.9 Internal/Flush Mount Installation
45 (1.77)
59 (2.32)
Figure 2.10 Panel Cut-Out Dimensions (Internal/Flush-Mount Installation)
illustrates how to attach the Installation Support Set A.
Figure
Enclosure panel
HOA Keypad
+0.5 (0.02)
0
Unit : mm (in)
2.2 Mechanical Installation
2.10.
Installation Support Set A
M3 × 6
Phillips recessed
pan head machine screw × 2
Unit: mm (in)
2
43