Operation Setting - Mitsubishi LJ61BT11 User Manual

7.2.1 Operation setting

Item
Set the Parameter name. (Even if the Parameter name is not set, this will
not affect the operation of the CC-Link system).
Parameter Name
Default value: Blank
Setting range: 8 characters or less
Set the input status for the data link error station.
Data Link Disorder Default value: Clear ("Hold Input Data" not checked)
Station Setting Setting range: Hold ("Hold Input Data" checked)
Set the slave station refresh/compulsory clear setting at programmable
controller CPU STOP.
Case of CPU STOP
Default value: Refresh ("Clears Compulsorily" not checked)
Setting
Setting range: Refresh ("Clears Compulsorily" not checked)
Set the number of occupied local stations and occupied standby master
stations.
Default value: Exclusive Station 1
Number of Exclusive
Setting range: Exclusive Station 1
Stations
Set the block guarantee of cyclic data per station.
Block Data Assurance Default value: Disable ("Enable Setting" not checked)
per Station Setting range: Disable ("Enable Setting" not checked)
7 - 10
The following shows the Operation Setting screen.
The following shows the setting items of the Operation Setting screen.
Clear ("Hold Input Data" not checked)
Clears compulsorily ("Clears Compulsorily" checked)
Exclusive Station 2
Exclusive Station 3
Exclusive Station 4
Enable ("Enable Setting" checked)
Description
7 PARAMETER SETTINGS
Standby
Master Local
Master Reference
station station
station
Section
Section
Section
Section
Section
: Available, : Not available
7 - 10
――
8.2.4,
8.2.6
8.2.5,
8.2.6
――
8.2.9