Mitsubishi LJ61BT11 User Manual page 27

Operating as a master station (data link control)
Standby master
Master station
MST
S MST
Number Name
2) Terminal block
3) Serial No. display part
4) Module joint lever
5) DIN rail hook
2 - 3
Station type and ON/OFF status of the "MST" and "S MST" LEDs
Local station
station
MST MST
S MST S MST
A CC-Link dedicated Ver.1.10 compatible cable is connected for data linking.
For the connection method, refer to Section 6.3.
Terminals SLD and FG are connected inside the module.
Since a 2-piece type terminal block is used, the module can be replaced
without disconnecting the signal lines to the terminal block.
(Shut off the external power supply for the system in all phases before
replacing the module.)
Displays the serial No. of the rating plate.
Fixes the connected modules.
Used to install the module to the DIN rail.
Operating status
Operating as a standby master station (standby)
Master station
MST
S MST
Standby master
station
MST
S MST
Description
2 PART NAMES
Local station
MST
S MST
: On, : Off
2 - 3