Mitsubishi LJ61BT11 User Manual page 160

8 - 54
3) Operational condition
Specify whether new settings or the previous settings are used for the
initial setting operating conditions.
Setting range: Set New
Same as Prev. Set
Default: Set New
When "Same as Prev. Set" is selected, the processing is performed as
follows:
Example)
RX1
0
4) Executional condition settings "Condition Device"
Set the device to be used for the initial setting operating condition.
Setting range: RX
SB
5) Executional condition settings "Device No."
Set the device number to be used for the initial setting operating
condition.
Even if the target station number is different, the same number must be
set.
Setting range: When RX is selected 0 to 37F (H)
When SB is selected 0 to FF (H)
6) Executional condition settings "Execute Condition"
Set the conditions under which initial settings are performed.
Setting range: ON
OFF
7) Details of execution "Write Device"
Set the device to which the contents of the initial setting are written.
Setting range: RY
RWw
8) Details of execution "Device No."
Set the device number to which the contents of the initial settings are
written.
Even if the target station number is different, the same number must be
set.
Setting range: When RY is selected
When RWw is selected
8 FUNCTIONS
SET
M0V K15
0 to 37F (H)
0 to 0F (H)
RY3
RWw2
8 - 54