Offset/Gain Setting Operation - Mitsubishi MELSEC-Q series User Manual

5
UTILITY PACKAGE (GX Configurator-DA)
5.6.2
Perform the offset/gain setting operation in the following sequence.
(1) Switch to the offset/gain setting screen
(2) Specify a channel
(3) Specify offset/gain setting
(4) Specify the user range setting
(5) Set up adjustment values
5
- 23 5.6 Monitoring/Test

5.6.2 Offset/gain setting operation

Offset/gain setting operation
Perform the operation in Screen 5.6.1 to display the offset/gain setting screen.
At this point, a dialog box to confirm the transition of Q66DA-G's operation mode (nor-
mal mode -> offset/gain setting mode) is displayed. Click the
the offset/gain setting mode.
Specify the target channel of offset setting or gain setting on the channel No. combo
box.
Specify either offset setting or gain setting on the channel specified on the channel
No. combo box using the radio button.
Specify a user range used for the offset/gain setting of each channel on the combo
box.
Set up an adjustment value of the offset value or gain value. Select "1," "10," "100," or
"1000" on the combo box, however, you can also set up adjustment values by enter-
ing a number (1 to 3000).
button to transit to