12 - 29
12 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL STATIONS
(2) Setting the parameters of the Ver.2 compatible local station (station
number 5)
(a) Setting the network parameters and automatic refresh
parameters
Set the network parameters and automatic refresh parameters as follows.
For the operation setting, refer to Section 12.3.3 (2)(b).
POINT
(1) When setting X, Y, B, W, SB and SW as refresh devices, make setting so that
they do not overlap with the device numbers used on the other networks, etc.
(2) When setting X and Y as refresh devices, set I/O numbers higher than the I/O
numbers used for I/O modules and intelligent function modules.
Refer to Section 12.3.3 (2) (b).
12 - 29