12.3.2 Setting the master station parameters
12 - 25
12 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND LOCAL STATIONS
(1) Setting the network parameters and automatic refresh parameters
Set the network parameters and automatic refresh parameters as follows.
Refer to 12.3.2 (2) for the operation setting. Refer to 12.3.2 (3) for the station
information setting.
POINT
(1) When setting X, Y, B, W, SB and SW as refresh devices, make setting so that
they do not overlap with the device numbers used on the other networks, etc.
(2) When setting X and Y as refresh devices, set I/O numbers higher than the I/O
numbers used for I/O modules and intelligent function modules.
Refer to Section 12.3.2 (2).
Refer to Section 12.3.2 (3).
12 - 25