Mitsubishi LJ61BT11 User Manual page 224

Parameter setting
G(P).RLPASET instruction
Control data
Slave station setting data
Reserved station specification data
Error invalid station specification data
Send, receive and automatic refresh buffer assignment data
Parameter registration (data link startup)
*1 Set the station number in hexadecimal. (Example) Set 14
9 - 41
(b) Program example
for station No. 20.
H
9. DEDICATED INSTRUCTIONS AND PROGRAMMING
Instruct to set parameters
Clear complete status.
All setting data: Valid
Number of connected modules
involved in communication: 3
Number of retries: 3 times
Number of automatic return
modules: 1 module
Operation specification when
CPU is down: stop
Scan mode specification:
Asynchronous
Delay time setting: 0
First:
Second:
Third:
Reserved station specification:
station number 3
Error invalid station specification:
station number 2
First (station number 1) local station
Send buffer: 100 word
First (station number 1) local station
Receive buffer: 100 word
First (station number 1) local station
Automatic refresh buffer: 0 word
Dedicated instruction
(G(P).RLPASET)
Local station, occupies
1 station, station
*1
number 1
Remote I/O station,
occupies 1 station,
station number 2
Remote I/O station,
occupies 1 station,
station number 3
9 - 41