10.1.2 Parameter setting
10 - 3
10 EXAMPLE OF COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE I/O STATIONS
(1) Setting the network parameters and automatic refresh parameters
of the master station
Set the network parameters and automatic refresh parameters as follows.
For the operation setting, refer to Section 10.1.2 (2).
POINT
When setting the refresh devices for special relay (SB) and special register (SW) to
SB and SW respectively, make sure that their device numbers do not duplicate with
those used in other networks.
Refer to Section 10.1.2 (2).
10 - 3