App - 69
(2) How to set the temporary error invalid station
Set the [Diagnostics]
station ..."
"Invalid station if temporary error".
Place the cursor at the station to be set as a temporary error invalid station and
click "Setting/Cancel".
(3) How to set the data link stop/restart
Set the [Diagnostics]
(a) Specifying applicable module
Specify the module whose data link is stopped or restarted in "Module
setting".
Specification method: Module No.
(b) Execution of data link stop/restart
Perform these operations by setting "Start Data Link" or "Stop Data Link" in
the network test.
[CC-Link / CC-Link/LT Diagnostics]
[CC-Link / CC-Link/LT Diagnostics].
I/O Address
APPENDIXES
"Monitoring other
App - 69