14.3 Parameter Settings
14.3.1 Setting parameters of the CC-Link IE field network master station
14 - 3
14 EXAMPLE OF COMMUNICATION WHEN MOUNTING MODULES ON THE HEAD MODULE
Set the parameters so that the CC-Link master station link special relay/register
(SB/SW) is applied to the link refresh of CC-Link IE field network.
By setting the parameters, the access to CC-Link master station link special
relay/register (SB/SW) from the master station on the CC-Link IE field network
becomes available.
(1) Setting the network parameters
Set the network parameters as follows, using GX Works2.
For the "Network Configuration Setting", refer to Section 14.3.1 (2). For the
"Refresh Parameters", refer to Section 14.3.1 (3).
14 - 3